In this article we’ll review the Hobart 210 MVP vs. Miller 211 and see which one comes out on top!
Miller Electric and Hobart brands are known for creating excellent welding machinery. People often get confused while deciding which one to go for. Thus, here we have made a comparison between Hobart 210 MVP vs. Miller 211 so that you can purchase the machinery which works best for you.
What Is A Hobart 210 MVP?
Hobart 210 MVP is designed to be an efficient and versatile machine capable of smoothly completing any project, whether it’s a small fabrication or complex manufacturing task. It has the potential to weld metals of 1/4 inch to 3/8 inch thickness.
It weighs around 79 lbs, requires 115 to 230 volts, has doubled input voltage, wire feed speed range is 40 to 680 IMP, welding range is 25 to 210 Amp. It is equipped with three user-friendly safe switches for turning the machine on & off and adjusting the amperage and voltage.
When To Use Hobart 210 MVP?
This machinery can be used for repairing and maintenance of automobiles. It is also beneficial in heavy construction work or small projects on farms. It is best for welding aluminum, stainless steel, mild steel. This equipment is convenient for DIY projects.
Pros & Cons of Hobart 210 MVP
What is Miller 211?
Miller Welds are a prominent brand well known for producing exceptional machinery like Miller 211. It has a multi-voltage plug. It’s powerful enough to weld mild steel of 1/4 inch to 3/8 inch depending on the material.
It weighs around 38 lbs, input voltage required is 120 or 240 volts, gives 30 to 230 amps of amperage range. It has a compact built, but many additional attributes and can weld both flux-cored and MIG.
When To Use Miller 211?
Miller is an ideal machine for beginners, commercial manufacturers, and carpenters, or hand craftsman. It is a mighty machine but moves very comfortably. If you want to repair something virtually obscure, it can be done with ease since its convenient features lets you operate in remote positions.
Pros & Cons of Miller 211
Main Differences between Hobart 210 MVP And Miller 211
Hobart 210 MVP vs. Miller 211 analysis is as follows:
- Miller 211 has an improved auto-set attribute and is lighter in weight than Hobart 210 MVP, making it easier to use.
- Miller 211 can use an outlet of 120 or 230-volt power, whereas the Hobart can be operated with a 115 or 230-volt power outlet.
- Duty cycle depends on the outlet you are using. Hobart gives 115 V, 90A @ 20% and 230V, 150A 30%, whereas Miller gives 115 V, 115A @ 20% and 230V, 150A @ 40%.
- Miller 211 is equipped with an advanced automatic setting, and Hobart gives seven voltage options for selection.
Conclusion & Recommendation
As we can see from this comparison of Hobart 210 MVP vs. Miller 211, Miller 211, is the better machine. It has many automatic features and smart technology while being lightweight, which gives you an enriching welding experience. Hobart 210 MVP is also an exceptional machine; if you are not into automatic tech and manually do the work, this is the right equipment for you.
Video of Hobart 210 MVP
Video of Miller 211X
Best Hobart 210 MVP
Best Miller 211X
1. Are Hobart Welders as good as Miller?
Please upgrade to a Hobart 210 for its dual-mode amperage capability, ranging from 25 to 210 amps (230v). Nonetheless, they are both less powerful than the Miller 211's mid-range output, ranging from 30 to 230 amps. Not to mention Miller's Continuum trilogy. You're looking at unequaled power of up to 400 amps with these.
2. How good are Hobart Welders?
As others have said, the Hobart and Miller welders are excellent. The 240v welders are far superior for every day and heavier use. If it is intended for infrequent usage and does not exceed 1/4" [which is extending it], a 120vac welder will suffice.
4. Is Hobart owned by Miller?
ITW is a worldwide corporation that manufactures a diverse range of value-added and short-lead-time industrial products and equipment. It is also the parent company of Miller Electric Manufacturing. Hobart is a brand that embodies collaboration, creativity, and knowledge and is a renowned industry leader.
5. Is Hobart Made in USA?
Hobart, a division of Illinois Tool Works, is a maker of commercial food preparation equipment. We discovered that several of their USA-made products are manufactured in Maryland. Hobart also manufactures meat preparation equipment, including meat saws, grinders, and slicers.
5. Can a Miller 211 weld aluminum?
Yes, this welding machine can do so—finally, a reliable and cost-effective method of welding aluminum. When coupled with a Millermatic 211 Auto-Set with MVP, the new Spoolmate 100 Series spool gun enables you to weld aluminum gauges ranging from 18 ga to 3/8 in.